樂泰 3508電子組裝/樂泰 3508電子組裝/樂泰 3508電子組裝/樂泰 3508電子組裝/樂泰 3508電子組裝/樂泰 3508電子組裝/樂泰 3508電子組裝/樂泰 3508電子組裝/樂泰 3508電子組裝/樂泰 3508電子組裝/樂泰 3508電子組裝/樂泰 3508電子組裝/樂泰 3508電子組裝/樂泰 3508電子組裝/樂泰 3508電子組裝/樂泰 3508電子組裝/樂泰 3508電子組裝/樂泰 3508電子組裝/樂泰 3508電子組裝/工業膠水/電子組裝膠水/工業用膠
技術服務熱線：021-51693135 / 021-22818476
3508™ reworkable cornerfill is designed to cure during pb-free
reflow while allowing self-alignment of IC components. It can
be pre-applied to the board at the corners of the pad site
using a standard SMA dispenser.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Viscosity, Cone & Plate, @ 25 °C mPa∙s (cP) 50,000
Specific Gravity @ 25 °C 1.24
Pot Life @ 25oC, days >30
Shelf Life @ 2 to 8°C, months 6
Flash Point - See MSDS
TYPICAL CURING PERFORMANCE
Recommended Cure Schedule
Pb-free solder reflow profile @ 245°C
(3 hours @ 180°C for Tg testing)
The above cure profile is a guideline recommendation. Cure
conditions (time and temperature) may vary based on
customers' experience and their application requirements, as
well as customer curing equipment, oven loading and actual
oven temperatures.
Storage
Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
labeling.
Optimal Storage: 2 to 8°C. Storage below 2°C or greater
than 8°C can adversely affect product properties. 3508™可重復使用的拐角填充物設計用于在無pb時固化
回流，同時允許IC組件的自對準。它可以
預先施加到墊子位置角落的板上
使用標準SMA分配器。
固化材料的典型特性
粘度，錐和板，@ 25°C mPa∙s（cP）50,000
比重@ 25°C 1.24
25°C，天> 30
保質期2至8°C，月6
閃點 - 參見MSDS
典型的固化性能
推薦治療時間表
無鉛焊料回流焊@ 245°C
（對于Tg測試，180℃下3小時）
以上治療方案是指導性建議。治愈
條件（時間和溫度）可能會有所不同
客戶的經驗和應用要求
以及客戶固化設備，烤 |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知?jiǎng)h除。