本公司專業生產批發各類電動伸縮門 卷簾門 車庫門 平移門 道閘等門機遙控器。另有管狀電機 外掛電機控制器 對拷 快拷 杜亞遙控器批發
歡迎來電咨詢電話:13641483155 QQ:2850275113 (小陳)
Telephone:0755-89760704 Fax:0755-61201916
新快速拷貝型遙控器產品說明
New fast copy type remote control product description
1、可以對拷的芯片:
2260(所有廠商)、2262(所有廠商)、PT2264、5326(所有廠商)、SC5262、HT600、HT680、HT6207、HT6010、HT6012、HT6014、SMC918系列、527(所有廠商)、1527(所有廠商)、2240(所有廠商)、HCS101、HCS200HCS201(部分代碼)、HCS300HCS301(部分代碼)、部分單片機..........
1.Chips could be copied
2260(all manufacturers);2262(All manufacturers);PT2264, 5326(All manufacturers);SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918series,527(All manufacturers);1527(All manufacturers);2240(All manufacturers);HCS101, HCS200HCS201(part code),HCS300HCS301(部分代碼), part single chip microcomputer..........
2、清碼方法:
同時按住開鎖與關鎖兩鍵(有些外殼是上行與下行兩鍵),LED指示燈閃爍三下,松開按下去的任意一個按鍵,另一個不松,點擊松開的按鍵三下,LED指示燈進入快速閃爍狀態,此時內存的數據全部清除,清完數據之后的遙控器,無論按哪個按鍵,LED指示燈都是不亮。
2.Code cleaning method:
Press the unlock button and lock button at the same time(some shells are the up button and down button), after the LED indicator light flashes three times, loosen any one of the buttons while the other is kept pressing, then push the released button three times, the LED indicator will enter into the fast flashing status. At this time all the memory data is cleared, the cleaned remote control will not have lighting LED indicator no matter which button you press.
3、對拷方法:
一手持原配遙控器,另一手持對拷遙控器,兩只遙控器盡量靠近,(理想的是將兩個遙控器零距離邊靠著邊放在桌面上)分別按下所需對拷的按鍵,LED指示燈快速閃爍三下之后快速閃爍,對拷成功,其他按鍵操作方法相同。有些遙控器發射功率較小,應原配遙控器與對拷遙控器背靠背操作,才好對拷。有些操作環境有干擾的,應避開干擾操作,如果對拷不太好使的,清碼以后重新對拷。
3. Copy method
One hand keeps the original remote controller, while another keeps |
 |
|